On average, indoor air is 8 times more polluted than outdoor air, negatively affecting health and well-being.
By installing a punctual VMC system it is possible to create an air exchange in order to improve its quality.

AIR EXCHANGE UP TO 60 m3/h

IMPROVED AIR QUALITY

HEAT RECOVERY CLASS A

ENERGY SAVING

HUMIDITY CONTROL AT 3 LEVELS

NO MORE MOLD PROBLEMS

LOW NOISE

4 dB IN NIGHT MODE

AIR FILTRATION

THE BUILDING THAT BREATHES

INTUITIVE
ADJUSTMENT.

With the remote control you can adjust up to 16 units simultaneously by setting:

  1. Flow rate: 60m3/h – 40 m3/h – 20 m3/h
  2. Automatic operation mode thanks to humidity and twilight sensors
  3. Humidity control: 90% – 60% – 40%
  4. Surveillance mode: The product will remain off but still active thanks to its sensors. In case of ambient humidity higher than the set one, the product will be activated to return the humidity to the desired level
  5. Night function: to further reduce air flow and noise at night
  6. Flow function: to select the direction of air flow
  7. Boost function: air is expelled at maximum speed for a certain period of time.

HOW IT
WORKS.

  1. For 70 seconds the fan extracts the air inside the room
  2. For 70 seconds, the outside air passes through the exchanger, is pre-heated and injected as new air into the room. The extraction phase is then reactivated.

The thermal energy is retained in the ceramic heat exchanger until the maximum capacity is reached. Every 70 seconds the fan changes the direction of rotation alternating phases of air intake and extraction.

In one hour you can change the air to a room of about 25 m2. The air passage always takes place from the outside. The cold air passes into the heat exchanger, recovers the thermal energy and is then fed into the room at a more comfortable temperature.In this way, you get an important energy saving because the heating system does not come into operation at maximum intensity, which would happen if you opened the windows to replace the spoiled air. In the same way in summer the air is pre-cooled before being released into the environment.